Maggard Razors Base Stand for DE Safety Razor, MR5, 15mm

4.83 out of 5 based on 6 customer ratings
(6 customer reviews)



Solid 303 Stainless Steel

51 in stock

Product Description


Stand is solid 303 Stainless steel, no logos or branding makes for a nice clean look.

Inner diameter measurement is 15.35mm – and fits a Maggard MR5 perfectly.  

Note – at first they are just a tiny bit tight but a few uses and the razor will slide in and out without issue.  It won’t damage any knurling (we’ve tested on several MR5 handles).

6 reviews for Maggard Razors Base Stand for DE Safety Razor, MR5, 15mm

  1. 5 out of 5


    I bought two of these, one for my Rockwell 6S and another for my Wolfman WRH1 razors. These look great on the counter next to my sink, and hold my razors securely. They are heavy enough that I have no concern that my razor is going to fall over.

    For about $13 these are an amazing value, especially considering that Rockwell charges $30 for their own (very similar looking) razor stand and Wolfman charges $100 for their (admittedly fancier) stands.

  2. 4 out of 5


    Good but not perfect.

    I bought this to fit a Wolfman razor with a WRH1 handle and the diameter fits perfectly and looks great. I deducted a star because the hole in the center of the razor stand goes a little less than half as deep as the stand is tall. This allows my razor to wobble about a fair bit. Had the hole gone down 75% of the height of the stand the razor would be held much more securely and it would still be plenty heavy enough to keep the razor upright.

  3. 5 out of 5


    Attractive, space saving, and reasonably priced. Holds my MR5 upright with no wobble. Great little stand.

  4. 5 out of 5


    Great value for the price. Fits the Maggard MR5 perfectly. I also tested it with an Ikon SE handle, and it’s almost perfect there too (just a tiny bit loose). The shallow depth of the main hole means anything much narrower than 15mm at the base will be unstable even if it has a perfectly flat end; for example the 14mm handles from Timeless. But it works great for the MR5, just as advertised. I didn’t even get the scraping they warn about in the description.

  5. 5 out of 5


    Bought for a 15 mm Windrose handle for which it is a slightly loose fit. Seems stable enough though and it has tidied up my limited countertop space in the bathroom. Looks good.

  6. 5 out of 5


    Just got this stand today. I bought it specifically for an Ikon X3 slant razor with SE handle. Razor fits. Slightly loose, but doesn’t seem as though the razor will topple out of it easily. Definitely will not fit the Bulldog or OSS handles. Also slightly too large for my Merkur 34C. The bore is way too big. I do wish the bore was slightly deeper, but it gets the job done. Has some nice heft to it. Very well done finish, no blemishes at all. Wouldn’t mind seeing it in a satin finish. Most of my razors aren’t polished. I am planning on buying a few of the other sizes to put my other razors in. Starting my shave den, and I think these give a much cleaner look than the razor with brush stands. This was my first order from I am extremely impressed. Everything was packaged very well. I all arrived in excellent condition. Could not find even the slightest scratch on any of the items. My order even arrived ahead of schedule. I will absolutely be ordering from them again.

Add a review