Skip to content

Naniwa A-901 Kitchen Knife Sharpening Guide Clip

SKU NAN-KNIFE-SHARPENER
We currently have 37 in stock.
by Naniwa
Original price $12.99 - Original price $12.99
Original price
$12.99
$12.99 - $12.99
Current price $12.99

Made in Japan.

Naniwa Japanese Knife Sharpening Guide:
Most knife sharpeners find maintaining a consistent angle to be the hardest part of putting a good edge on their knives. The Naniwa Japanese Knife Sharpening Guide is a simple, easy to use guide to help with just that issue.

Clip it on the spine of your knife - To use the Naniwa Japanese Knife Sharpening Guide, slide it onto the back of your knife, and position it roughly in the middle of the length of the blade. Be sure the guide is firmly clamped onto the blade and that the blade is seated all the way into the guide.

Move the knife and guide over the sharpening stone keeping the ceramic rub bar in contact with the stone, slide the knife the length of the stone in a sweeping motion so that every portion of the edge comes in contact with the stone. Raise the handle as needed to keep the edge in contact with the stone as you move towards the tip.

Stay on one grit until you feel a burr along the entire opposite side of the edge, then turn the blade over and do the same on the other side. Repeat the process through progressively finer grits until you are satisfied with the edge.

As a final step, the Naniwa guide will work on a strop if the strop is of suitable size. Remember to always move the blade away from the edge when stropping.

This is a fixed guide

The Naniwa Japanese Knife Sharpening Guide is not adjustable. The angle it creates is determined by the width of the knife being sharpened. The wider the knife, the lower the sharpening angle. As such, we recommend it only for traditional kitchen cutlery with blade widths of 3/4” or greater. For instance, a blade of 1 1/4” in width will sharpen to an angle of 17 degrees with this guide.

Size 58 x 19 x 16mm

 

  • Shipping
  • Returns